Oil Cooler Pipes / Hoses Installation

WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.

Install the oil cooler inlet pipe assembly and the bolts.
Tighten:

Tighten the oil cooler inlet pipe bolts to 35 N.m (26 lb-ft).

Fig 1: Identifying Oil Cooler Inlet Pipe & Bolts
Courtesy of SUZUKI OF AMERICA CORP.
Install the oil cooler outlet pipe assembly and the bolts.
Tighten:

Tighten the oil cooler outlet pipe bolts to 35 N.m (26 lb-ft).
Refill the transaxle fluid. Refer to Changing the Fluid .
Connect the negative battery cable.

Fig 2: Identifying Oil Cooler Outlet Pipe Assembly And Bolts
Courtesy of SUZUKI OF AMERICA CORP.