Proportioning Valve Removal

WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the brake lines from the proportioning valve.
Remove the nut that secures the proportioning valve to the bulkhead.

Fig 1: Identifying Proportioning Valve To Bulkhead Nut
Courtesy of SUZUKI OF AMERICA CORP.
Remove the brake lines from the hydraulic modulator.

Fig 2: Removing/Installing Brake Lines And Hydraulic Modulator
Courtesy of SUZUKI OF AMERICA CORP.