Rear Toe Adjustment

WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.

Perform a preliminary inspection before any attempt is made to change or correct the wheel alignment factors. Refer to Preliminary Inspection .
Loosen the front parallel link cam bolt to crossmember.

Fig 1: Identifying Front Parallel Link Cam Bolt To Crossmember
Courtesy of SUZUKI OF AMERICA CORP.
Tighten the front parallel link cam bolt to 40 N.m (30 lb-ft).

Fig 2: Identifying Front Parallel Link Cam Bolt
Courtesy of SUZUKI OF AMERICA CORP.
Adjust the rear toe specification. Refer to Wheel Alignment Specifications for preferred specifications.
Tighten the front parallel link cam bolt to 80 N.m (59 lb-ft).

Fig 3: Identifying Front Parallel Link Cam Bolt
Courtesy of SUZUKI OF AMERICA CORP.