Rear Shock Absorber Assembly

WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.

Install the rear spring lower insulator, coil spring, hollow bumper, dust cover, spring upper insulator and rear strut mount onto the rear strut assembly.

Fig 1: Identifying Rear Shock Absorber Assembly
Courtesy of SUZUKI OF AMERICA CORP.
Compress the spring.
Install the lock nut to the strut damper rod.
Release the rear strut assembly from the spring compressor KM-329-A.

Fig 2: Identifying Lock Nut & Strut Damper Rod
Courtesy of SUZUKI OF AMERICA CORP.