Rear Knuckle Installation

WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.

Install the hub into the rear knuckle. Refer to Rear Hub and Bearing Assembly Installation .
Install the front and rear parallel link. Refer to Front Parallel Link Installation .
Install the upper arm nut-to-rear knuckle.
Tighten:

Tighten the upper arm nut-to-rear knuckle to 110 N.m (81 lb-ft).

Fig 1: Identifying Upper Arm Nut-To-Rear Knuckle
Courtesy of SUZUKI OF AMERICA CORP.