LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine General Information And Diagnosis >> Diagnostic Information and Procedures >> DTC P0335: Crankshaft Position Sensor "A" Circuit >> DTC Confirmation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Confirmation Procedure

NOTE: Check to make sure that the following conditions are satisfied when using this "DTC Confirmation Procedure".
  • The following DTCs are not detected: DTCs related to starter relay
  1. With ignition switch OFF, connect scan tool.
  2. Turn ON ignition switch and clear DTC by using scan tool.
  3. Crank engine for 3 - 5 sec.
  4. Check DTC.
scientia non olet · About LEMON Manuals