Electric Throttle Body Assembly Operation Check

Remove air cleaner outlet hose.
Turn ON ignition switch.
Depress accelerator pedal gradually and check that throttle valve moves smoothly until it opens fully.
Release accelerator pedal depressed in Step 3) and check that throttle valve (1) moves back to default position (position where throttle valve is open by 7° (2) from its completely closed position).

Fig 1: Checking Throttle Body Assembly Operation
Courtesy of SUZUKI OF AMERICA CORP.

If check result is satisfactory, electric throttle body system is in good condition. If check result is not satisfactory, proceed to next step.
Perform "ACCELERATOR PEDAL POSITION (APP) SENSOR ASSEMBLY ON-VEHICLE INSPECTION ", "THROTTLE ACTUATOR (MOTOR) CHECK " and "THROTTLE POSITION SENSOR PERFORMANCE CHECK ".
If check results are not satisfactory, replace electric throttle body assembly.

If check results are satisfactory, wire circuit and/or ECM are faulty.