LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Standard >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Repair Instruction >> Water Pump Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Water Pump Removal and Installation: Removal

  1. Disconnect negative (-) cable at battery.
  2. Drain coolant referring to COOLING SYSTEM DRAINING .
  3. Remove water pump and generator drive belt referring to WATER PUMP AND GENERATOR DRIVE BELT REMOVAL AND INSTALLATION .
  4. Remove front bumper referring to FRONT BUMPER AND REAR BUMPER COMPONENTS .
  5. Remove exhaust manifold referring to EXHAUST MANIFOLD REMOVAL AND INSTALLATION .
  6. Remove heater pipe (2) from water pump and cylinder block.
  7. Remove thermostat referring to THERMOSTAT REMOVAL AND INSTALLATION .
  8. Remove water pump (1) from cylinder block (3).
    Fig 1: Identifying Water Pump Bolts And Heater Pipe
    G04847007Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals