LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Standard >> Repair and Diagnosis >> Electrical >> Horns >> Instrumentation/Driver Info./Horn >> Repair Instructions >> Combination Meter Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Combination Meter Removal and Installation: Removal

  1. Disconnect negative (-) cable at battery.
  2. Remove dash side trim (1) and steering column hole cover (2).
    Fig 1: Identifying Dash Side Trim And Steering Column Hole Cover
    G04848921Courtesy of SUZUKI OF AMERICA CORP.
  3. Remove center ventilation louver referring to Step  1) and  2) of INFORMATION DISPLAY (CLOCK) REMOVAL AND INSTALLATION .
  4. Remove combination meter cluster panel (1) pulling it in arrow direction shown in figure.
    Fig 2: Identifying Combination Meter Cluster Panel
    G04848922Courtesy of SUZUKI OF AMERICA CORP.
  5. Remove screws (1) fastening combination meter.
  6. Remove combination meter (2) pulling it arrow direction as shown.
    Fig 3: Identifying Combination Meter
    G04848923Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals