G Sensor Inspection (4WD Model)

Reference: G SENSOR REMOVAL AND INSTALLATION (4WD MODEL) 

Connect positive cable of 12 V battery to "A" terminal of sensor and ground cable to "C" terminal.

Then using voltmeter, check voltage between terminals "B" and "C".

If measured voltage is not as specified, replace G sensor.

G sensor specification 

When placed horizontally: 2 - 3 V 

When placed upright with arrow upward: 3 - 4 V 

When placed upright with arrow downward: 1 - 2 V 

Fig 1: Checking G Sensor

Courtesy of SUZUKI OF AMERICA CORP.