Door Lock Operation (Keyless Start System)
- Check that all door locks are released and all doors are closed.
- With remote controller of which ID code is registered in keyless start control module carried with yourself, check that pushing driver door request switch once locks all doors.
- Check that pushing request switch of driver door, passenger door or rear end door once releases corresponding door lock.
- Check that pushing again request switch pushed in Step 3 releases all door locks.
Courtesy of SUZUKI OF AMERICA CORP.
NOTE:
If door of which request switch has been pushed is opened/closed before performing Step 4, all door locks will not be released even when Step 4 is performed. If Step 4 is performed after door is opened/closed, only the door of which request switch was pushed will be locked.