DTC Troubleshooting
NOTE:
Make sure that DTC of CAN communication is not detected by ECM.
DTC TROUBLESHOOTING CHART
| Step | Action | YES | NO |
|---|---|---|---|
| 1 | Was "Engine and Emission Control System Check" performed? | Go to Step 2. | Go to ENGINE AND EMISSION CONTROL SYSTEM CHECK . |
| 2 | Vehicle speed signal check Is vehicle speed displayed on scan tool in Step 4) and 5) of "DTC Confirmation Procedure"? |
Intermittent trouble. Check for intermittent referring to INTERMITTENT AND POOR CONNECTION INSPECTION . | Go to Step 3. |
| 3 | DTC check in ABS / EPS® control module
Is there DTC(s) of front wheel speed sensor detected? |
Go to applicable DTC diag. Flow. | Check for intermittent referring to INTERMITTENT AND POOR CONNECTION INSPECTION . If OK, substitute a known-good ECM and recheck. |