Connector "C07"
CONNECTOR TERMINAL REFERENCE
| Terminal | Wire color | Circuit | Standard voltage | Condition |
|---|---|---|---|---|
| C07-1 | RED | "R" range signal for transmission range sensor | 10 - 14 V | Ignition switch is at ON position and selector lever is at "R" range. |
| 0 - 1 V | Ignition switch is at ON position and selector lever is at other than "R" range. | |||
| C07-2 | - | - | - | - |
| C07-3 | - | - | - | - |
| C07-4 | - | - | - | - |
| C07-5 | WHT | Signal for output shaft speed sensor | 2 - 3 V | Ignition switch is at ON position. |
| * (REFERENCE WAVEFORM NO. 4 ) | Vehicle is running. (Output signal is pulse. pulse frequency varies depending on output shaft speed.) |
|||
| C07-6 | BLK | Signal for input shaft speed sensor | 2 - 3 V | Ignition switch is at ON position. |
| * (REFERENCE WAVEFORM NO. 5 ) | Engine is running at idle speed. (Output signal is pulse. Pulse frequency varies depending on output shaft speed.) |
|||
| C07-7 | GRN | "D" range signal for transmission range sensor | 10 - 14 V | Ignition switch is at ON position and selector lever is at "D" or "3" range. |
| 0 - 1 V | Ignition switch is at ON position and selector lever is at other than "D" range. | |||
| C07-8 | GRN/ORN | "N" range signal for transmission range sensor | 10 - 14 V | Ignition switch is at ON position and selector lever is at "N" range. |
| 0 - 1 V | Ignition switch is at ON position and selector lever is at other than "N" range. | |||
| C07-9 | YEL | "3" position switch | 10 - 14 V | Ignition switch is at ON position and selector lever is at other than "3" or "2" range. |
| 0 - 1 V | Ignition switch is at ON position and selector lever is at "3" or "2" range. | |||
| C07-10 | - | - | - | - |
| C07-11 | - | - | - | - |
| C07-12 | - | - | - | - |
| C07-13 | - | - | - | - |
| C07-14 | BLK | Ground for output shaft speed sensor | 0 - 3 V | Ignition switch is at ON position. |
| C07-15 | - | - | - | - |
| C07-16 | WHT | Ground for input shaft speed sensor | 0 - 3 V | Ignition switch is at ON position. |
| C07-17 | - | - | - | - |
| C07-18 | LT GRN/BLK | "L" range signal for transmission range sensor | 10 - 14 V | Ignition switch is at ON position and selector lever is at "L" range. |
| 0 - 1 V | Ignition switch is at ON position and selector lever is at other than "L" range. | |||
| C07-19 | GRN/YEL | "2" range signal for transmission range sensor | 10 - 14 V | Ignition switch is at ON position and selector lever is at "2" range. |
| 0 - 1 V | Ignition switch is at ON position and selector lever is at other than "2" range. | |||
| C07-20 | PNK/BLK | "P" range signal for transmission range sensor | 10 - 14 V | Ignition switch is at ON position and selector lever is at "P" range. |
| 0 - 1 V | Ignition switch is at ON position and selector lever is at other than "P" range. | |||
| C07-21 | - | - | - | - |
| C07-22 | - | - | - | - |
| C07-23 | BLU | Data link connector | 10 - 14 V | Ignition switch is at ON position. |
| C07-24 | - | - | - | - |
| C07-25 | - | - | - | - |
| C07-26 | - | - | - | - |