Connector "C06"
CONNECTOR TERMINAL REFERENCE
| Terminal | Wire color | Circuit | Standard voltage | Condition |
|---|---|---|---|---|
| C06-1 | BLK | Ground for TCM | 0 - 1 V | Ignition switch is at ON position. |
| C06-2 | LT GRN/BLK | Ground for pressure control solenoid valve | 0.6 - 1.0 V | Ignition switch is at ON position. |
| C06-3 | - | - | - | - |
| C06-4 | GRY | Output for pressure control solenoid valve | * 0 - 1 V ↑ ↓ 10 - 14 V (REFERENCE WAVEFORM NO. 1 ) |
Engine is running at idle speed. (Output signal is duty pulse. Duty ratio varies depending on throttle valve opening.) |
| C06-5 | WHT/BLU | Output for TCC pressure control solenoid valve | * 0 - 1 V ↑ ↓ 10 - 14 V (REFERENCE WAVEFORM NO. 2 ) |
Vehicle is running. (Sensor signal is pulse. Pulse frequency varies depending on vehicle condition.) |
| C06-6 | YEL/BLK | Main power source | 10 - 14 V | Ignition switch is at ON position. |
| C06-7 | WHT | CAN communication line (active low signal) | * 0.5 - 2.5 V (REFERENCE WAVEFORM NO. 3 ) | Ignition switch is at ON position. (CAN communication line signal is pulse. Pulse signal frequency varies depending on engine condition.) |
| C06-8 | - | - | - | - |
| C06-9 | - | - | - | - |
| C06-10 | - | - | - | - |
| C06-11 | LT GRN | Signal for transmission fluid temperature sensor | 2.9 - 3.1 V | Ignition switch is at ON position and transmission fluid temperature is 20°C (68°F). |
| 0.3 - 0.5 V | Ignition switch is at ON position and transmission fluid temperature is 100°C (212°F). | |||
| C06-12 | ORN | Ground for transmission fluid temperature sensor | 0 - 1 V | Ignition switch is at ON position. |
| C06-13 | - | - | - | - |
| C06-14 | - | - | - | - |
| C06-15 | BLK/YEL | Shift solenoid valve - B (No. 2) | 10 - 14 V | Ignition switch is at ON position and selector lever is at other than "P", "R" or "N" range. |
| C06-16 | BRN | Shift solenoid valve - A (No. 1) | 0 - 1 V | Ignition switch is at ON position and selector lever is all ranges. |
| C06-17 | RED | CAN communication line (active high signal) | * 2.5 - 4.5 V (REFERENCE WAVEFORM NO. 3 ) |
Ignition switch is at ON position. (CAN communication line signal is pulse. Pulse signal frequency varies depending on engine condition.) |
| C06-18 | - | - | - | - |
| C06-19 | - | - | - | - |
| C06-20 | - | - | - | - |
| C06-21 | - | - | - | - |
| C06-22 | - | - | - | - |
| C06-23 | BLK | Ground for TCM | 0 - 1 V | Ignition switch is at ON position. |
| C06-24 | WHT/RED | Power source for back-up | 10 - 14 V | Ignition switch is at ON position. |