Front Wheel Hub, Disc, Bolt and Bearing Check

Inspect each wheel disc for dents, distortion and cracks.
A disc in badly damaged condition must be replaced.
Check rust of installation face inside of wheel disc.
As rust affects adversely, remove it thoroughly.
Check tightness of wheel nuts and, if necessary, retighten them to specified torque.
Tightening torque

Wheel nut: 85 N.m (8.5 kg-m, 61.5 lb-ft)
Check wear of wheel bearing. When measuring thrust play, apply a dial gauge to wheel hub as shown in figure.
Thrust play limit

0.1 mm (0.004 in.)

Fig 1: Measuring Thrust Play
Courtesy of SUZUKI OF AMERICA CORP.
Check wheel bearing noise and smooth wheel rotation by rotating wheel.
If defective, replace bearing.