April 5, 2026: LEMON Manuals is launched! Read the announcement.

Back Up Light Switch Removal and Installation: Installation

WARNING: This page is about a different variant/trim than selected.

Reference: BACK UP LIGHT SWITCH INSPECTION

Apply oil to new O-ring (1) and tighten back up light switch (2) to specified torque.
Tightening torque

Back up light switch a: 23 N.m (2.3 kg-m, 17.0 lb-ft)

Fig 1: Identifying Back Up Light Switch
Courtesy of SUZUKI OF AMERICA CORP.
Connect back up light switch coupler.
Install battery and tray with ECM.