Starter Removal

WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative battery cable.
Remove the air hose inlet hose bolts.

Fig 1: Removing/Installing Inlet Hose Bolts
Courtesy of SUZUKI OF AMERICA CORP.
Remove the starter solenoid nut to disconnect the electrical cable.
Disconnect the starter electrical connector.

Fig 2: Removing/Installing Starter Electrical Connector
Courtesy of SUZUKI OF AMERICA CORP.
Remove the starter-to-engine block mounting bolt and the starter-to-transaxle mounting bolt.
Remove the starter assembly.

Fig 3: Removing/Installing Starter-To-Engine Block Mounting Bolt
Courtesy of SUZUKI OF AMERICA CORP.