Excessive Friction Check
WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.
Use the following procedure to check for excessive friction in the front suspension:
- With the help of another technician, lift up on the front bumper, raising the vehicle as high as possible.
- Slowly release the bumper, allowing the vehicle to assume its normal trim height. See General Specification .
- Measure the distance from the street level to the center of the bumper.
- Push down on the bumper, release slowly, and allow the vehicle to assume its normal trim height.
- Measure the distance from the street level to the center of the bumper.
- The difference between the 2 measurements should be less than 12.7 mm (0.5 in.). If the difference exceeds this limit, inspect the control arms, the struts, and the ball joints for damage or wear.