Control Arm Bushings Disassembly

WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.

Tools Required:

KM-508-A Remover/Installer

KM-307-B Removal Plate

Remove the control arm. Refer to Control Arm Removal .
Remove the control arm rear bushing using a press, the removal plate KM-307-B, and a drift.

Fig 1: Identifying Control Arm Rear Bushing & Removal Plate
Courtesy of SUZUKI OF AMERICA CORP.
Remove the control arm front bushing using a press, the remover/installer KM-508-A and the removal plate KM-307-B.

Fig 2: Identifying Control Arm Front Bushing, Removal Plate & Remover/Installer
Courtesy of SUZUKI OF AMERICA CORP.