Centermember Assembly Installation

WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.

Install the centermember assembly and bolts.
Tighten:

Tighten the centermember bolts to 90 N.m (66 lb-ft).

Fig 1: Identifying Centermember Assembly And Bolts
Courtesy of SUZUKI OF AMERICA CORP.
Install the centermember front damping block bolt and rear damping block bolt.
Tighten:

Tighten the centermember front damping block bolt and rear damping block bolt to 80 N.m (59 lb-ft).

Fig 2: Identifying Centermember Front Damping Block Bolt And Rear Damping Block Bolt
Courtesy of SUZUKI OF AMERICA CORP.