Engine Mount (LH) Installation
WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.
- Installation should follow the removal procedure in the reverse order.
- Install the engine mount (LH).
Tighten:
- Tighten the 4 transaxle mount cage-to-longitudinal member bolts to 55 - 75 N.m (41 - 55 lb-ft).
- Tighten the transaxle mount cage-to-transaxle mount bracket bolt to 55 - 75 N.m (41 - 55 lb-ft).
- Tighten the transaxle mount cage-to-transaxle mount bracket nut to 55 - 75 N.m (41 - 55 lb-ft).
- Tighten the transaxle mount cage through bolt to 100 - 120 N.m (74 - 89 lb-ft).