VIS Valve Installation

WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.

Installation should follow the removal procedure in the reverse order.
Install the VIS valve and the VIS actuator.
Tighten:
- Tighten the VIS valve retaining bolts to 10 - 13 N.m (89 - 115 lb-in.).
- Tighten the VIS actuator retaining bolts to 10 - 13 N.m (89 - 115 lb-in.).
  
  Fig 1: Identifying VIS Valve, Actuator And Retaining Bolts
  Courtesy of SUZUKI OF AMERICA CORP.