Knock Sensor Installation

WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.

Installation should follow the removal procedure in the reverse order.
Install the knock sensor.
Tighten:

Tighten the knock sensor retaining bolt to 18 - 20 N.m (13 - 15 lb-ft).

Fig 1: Identifying Knock Sensor And Retaining Bolt
Courtesy of SUZUKI OF AMERICA CORP.
Install the VIS vacuum tank.
Tighten:

Tighten the VIS vacuum tank retaining bolts to 7 - 9 N.m (62 - 80 lb-in.).

Fig 2: Identifying VIS Vacuum Tank And Retaining Bolts
Courtesy of SUZUKI OF AMERICA CORP.