Engine Coolant Temperature Sensor Removal

WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.

Relieve the pressure in the coolant reservoir by turning the coolant reservoir cap slightly counterclockwise.
Disconnect the negative battery cable.

Fig 1: Identifying Coolant Reservoir Cap
Courtesy of SUZUKI OF AMERICA CORP.
Remove the VIS vacuum tank. Refer to VIS Vacuum Tank Removal Z.

Fig 2: Identifying VIS Vacuum Tank
Courtesy of SUZUKI OF AMERICA CORP.
Disconnect the engine coolant temperature sensor (ECTS) connector.
Remove the ECTS from the cylinder head.

Fig 3: Disconnecting Engine Coolant Temperature Sensor (ECTS) Connector
Courtesy of SUZUKI OF AMERICA CORP.