Engine Coolant Temperature Sensor Installation

WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.

Installation should follow the removal procedure in the reverse order.
Install the ECTS.
NOTE: Apply the sealant to the threads on the ECTS.

Tighten:

Tighten the ECTS to 15 - 20 N.m (11 - 15 lb-ft).

Fig 1: Identifying ECTS
Courtesy of SUZUKI OF AMERICA CORP.
Install the VIS vacuum tank.
Tighten:

Tighten the VIS vacuum tank retaining bolts to 7 - 9 N.m (62 - 80 lb-in.).

Fig 2: Identifying VIS Vacuum Tank
Courtesy of SUZUKI OF AMERICA CORP.