Crankshaft Position (CKP) Sensor Installation

WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.

Installation should follow the removal procedure in the reverse order.
Install the crankshaft position (CKP) sensor.
Tighten:

Tighten the CKP sensor retaining bolt to 5 - 8 N.m (44 - 71 lb-in.).

Fig 1: Identifying Crankshaft Position (CKP) Sensor And Retaining Bolt
Courtesy of SUZUKI OF AMERICA CORP.
Install the CKP sensor heat shield housing.
Tighten:

Tighten the CKP sensor heat shield housing bolt to 7 - 9 N.m (62 - 80 lb-in.).

Fig 2: Identifying CKP Sensor Heat Shield Housing And Retaining Bolts
Courtesy of SUZUKI OF AMERICA CORP.