LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Instrumentation/Driver Info./Horn) >> Repair Instructions >> Horns Removal and Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Horns Removal and Installation: Installation

WARNING: This page is about a different car, the 2005 Suzuki Reno and 2005 Suzuki Forenza. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.
  1. Install the horn with the bolt.

    Tighten 

    Tighten the horn bolt to 20 N.m (15 lb-ft). (Left horn shown, right horn similar, if equipped.)

  2. Connect the electrical connector.
  3. Connect the negative battery cable.
    Fig 1: Installing Horn
    G04104436Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals