LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 76 (Seat System) >> Repair Instructions >> Front Seatback Removal and Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Seatback Removal and Installation: Installation

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the seatback onto the seat cushion.
  2. Install the front seatback bolts.

    Tighten: 

    Tighten the front seatback bolts to 45 N.m (33 lb-ft).

  3. Connect the electrical connectors.
    Fig 1: Identifying Front Seatback & Bolts
    G04718287Courtesy of SUZUKI OF AMERICA CORP.
  4. Install the seat trims to its original position.
  5. Install the front bucket seat in the vehicle. Refer to Front Bucket Seat Removal and Installation .
    Fig 2: Identifying Front Seat Trim & Screws
    G04718286Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals