Front Seat Trim Removal and Installation: Installation
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.
- Install the front seat trim with the screws.
Tighten:
Tighten the front seat trim screws to 12 N.m (106 lb-in).
- Install the front bucket seat in the vehicle. Refer to Front Bucket Seat Removal and Installation .