Front Bucket Seat Removal and Installation: Installation

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.

Install the seat.
Connect the electrical connectors.
Install the bolts into the front portion of the front seat.
Tighten:

Tighten the front seat-to-floor bolts to 25 N.m (18 lb-ft).
Install the plastic caps.

Fig 1: Identifying Front Portion Plastic Caps And Bolts
Courtesy of SUZUKI OF AMERICA CORP.
Install the bolts into the rear portion of the front seat.
Tighten:

Tighten the front seat-to-floor bolts to 25 N.m (18 lb-ft).
Install the plastic caps.
Connect the negative battery cable.

Fig 2: Identifying Rear Portion Plastic Caps And Bolts
Courtesy of SUZUKI OF AMERICA CORP.