Windshield Wiper Motor Removal and Installation: Removal
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the negative battery cable.
- Remove the left-side portion of the cowl vent grille. Refer to COWL VENT GRILLE REMOVAL AND INSTALLATION .
- Remove the nut and the washer that secure the wiper arm linkage to the motor drive shaft.
- Pry the wiper arm linkage off the motor drive shaft.
- Remove the nuts.
- Disconnect the electrical connector.
- Remove the bolts and the wiper motor.