Windshield Washer Pump(s) Removal and Installation: Installation
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.
- Install the washer pump.
- Connect the washer hose to the washer pump.
- Connect the electrical connector.
- Install the front wheel well splash shield with the bolts and the screws.
Tighten:
Tighten the front wheel well splash shield bolts to 1.5 N.m (13 lb-in).
- Install the front left wheel. Refer to WHEEL REMOVAL AND INSTALLATION .
- Connect the negative battery cable.