Sensing and Diagnostic Module (SDM) Removal and Installation: Installation

WARNING: This page is about a different car, the 2006 Suzuki Reno and 2006 Suzuki Forenza. However, it is still accessible from the selected car via links, so may be relevant.

Install the removed parts in the reverse order.
- Tightening torque of SDM mounting bolts is 10 N.m (89 lb-in).
- Enable the SIR. Refer to Enabling the Supplemental Inflatable Restraints (SIR) .
  
  Fig 1: Identifying SDM Mounting Bolts
  Courtesy of SUZUKI OF AMERICA CORP.