Airbag Module Deployment (Inside of Vehicle): Notes
WARNING: This page is about a different car, the 2006 Suzuki Reno and 2006 Suzuki Forenza. However, it is still accessible from the selected car via links, so may be relevant.
Deploy the airbags before disposing them. If a vehicle to be scrapped, the airbag may be deployed inside the vehicle.
WARNING:
To avoid injury while deploying an airbag or a pretensioner in the vehicle, observe the following precaution:
- Before deploying the airbags, remove all loose objects from the airbag's expansion area.
- Deploy the airbags with the vehicle doors closed and the side windows open.
- Deploy the airbags only in an evacuated area. Service personnel who must be present during the deployment should be at least 10 meters (33 feet) in front of the vehicle.
- Do not connect the voltage source until after having completed all other preparations for the deployment of airbags.
- Allow a deployed airbag module or pretensioner cool for 30 minutes before handling.
- Wear gloves and eye protection during the disposal procedure.
- If the deployment fails, disconnect the voltage source and wait 5 minutes before approaching the vehicle.