Tightening Torque Specifications
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS
| Application | N.m | Lb-Ft | Lb-In |
|---|---|---|---|
| Pressure Transducer | 7 | - | 62 |
| Expansion Valve Retaining Stud Bolts | 8 | - | 71 |
| Liquid Pipe Support Clamp Bolts | 4 | - | 35 |
| Liquid Pipe Block-to-Receiver Dryer Retaining Nut | 14 | 10 | - |
| Liquid Pipe Block-to-Expansion Valve Retaining Nut | 14 | 10 | - |
| Refrigerant Discharge Hose Block-to-Condenser Retaining Nut | 16 | 12 | - |
| Refrigerant Discharge Hose Block-to-Compressor Retaining Nut | 33 | 24 | - |
| Evaporator Core Cover Screws | 1.2 | - | 11 |
| Heater Core Housing-to-Evaporator Housing Retaining Screws | 1.2 | - | 11 |
| Suction Hose Block-to-Compressor Retaining Nut | 33 | 24 | - |
| Suction Hose Support Clamp-to-Longitudinal Member Bolt | 4 | - | 35 |
| Suction Hose Support Clamp-to-Engine Bracket Bolt | 14 | 10 | - |
| Suction Hose Block-to-Expansion Valve Retaining Nut | 14 | 10 | - |
| Band Clamp Bolt (Receiver Dryer) | 5 | - | 44 |
| Receiver Dryer-to-Condenser Pipe Block Bolt | 5 | - | 44 |
| Condenser Mount Bolts | 4 | - | 35 |
| Clutch Plate and Hub Assembly Retaining Nut (Compressor) | 17 | 13 | - |
| Through Bolts (Compressor) | 10 | - | 89 |
| Compressor Mounting Bolts and Nuts | 25 | 18.5 | - |
| Suction Hose/Liquid Pipe Block-to-Expansion Valve Retaining Nut | 14 | 10 | - |