Throttle Position Sensor Removal and Installation: Installation
WARNING: This page is about a different car, the 2005 Suzuki Reno and 2005 Suzuki Forenza. However, it is still accessible from the selected car via links, so may be relevant.
- With the throttle valve closed, position the TP sensor on the throttle shaft. Align the TP sensor with the bolt holes.
- Install the TP sensor retaining bolts.
Tighten
Tighten the throttle position sensor retaining bolts to 2 N.m (18 lb-in).
- Connect the TP sensor connector.
- Install the air intake tube and resonator.
- Connect the negative battery cable.