Knock Sensor Removal and Installation: Removal

WARNING: This page is about a different car, the 2005 Suzuki Reno and 2005 Suzuki Forenza. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative battery cable.
Raise and suitably support the vehicle.
Disconnect electrical connector at the knock sensor.

Fig 1: Identifying Electrical Connector At Knock Sensor
Courtesy of SUZUKI OF AMERICA CORP.
Remove the bolt and the knock sensor.

Fig 2: Removing Bolt And Knock Sensor
Courtesy of SUZUKI OF AMERICA CORP.