Knock Sensor Removal and Installation: Installation

WARNING: This page is about a different car, the 2005 Suzuki Reno and 2005 Suzuki Forenza. However, it is still accessible from the selected car via links, so may be relevant.

Install the knock sensor with the bolt.
Tighten

Tighten the knock sensor bolt to 20 N.m (15 lb-ft).

Fig 1: Installing Knock Sensor With Bolt
Courtesy of SUZUKI OF AMERICA CORP.
Connect the electrical connector at the knock sensor.
Lower the vehicle.
Connect the negative battery cable.

Fig 2: Identifying Electrical Connector At Knock Sensor
Courtesy of SUZUKI OF AMERICA CORP.