Engine Coolant Temperature Sensor Removal and Installation: Installation
WARNING: This page is about a different car, the 2005 Suzuki Reno and 2005 Suzuki Forenza. However, it is still accessible from the selected car via links, so may be relevant.
- Coat the threads of the ECT sensor with sealer.
- Install the ECT sensor into the EI system ignition coil adapter.
Tighten
Tighten the engine coolant temperature sensor to 20 N.m (15 lb-ft).
- Connect the ECT sensor connector.
- Fill the coolant system.
- Connect the negative battery cable.