Fluid Reservoir Removal and Installation: Installation
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.
- Attach the fluid reservoir to the fluid reservoir bracket.
- Fix the fluid reservoir with the nuts.
Tighten:
Tighten the fluid reservoir nuts to 10 N.m.
- Connect both hoses to the fluid reservoir and secure the hose clamps.
- Fill the fluid reservoir with power steering fluid.
- Inspect for leaks. If there are leaks, correct the cause of the leaks and bleed the system. Refer to Bleeding the Power Steering System .