Shift Linkage Assembly Removal and Installation: Installation

WARNING: This page is about a different car, the 2007 Suzuki Reno, 2007 Suzuki Forenza, 2006 Suzuki Reno, and 2006 Suzuki Forenza. However, it is still accessible from the selected car via links, so may be relevant.

Install the shift linkage assembly.
Install the fixing shaft pin and connect the linkage connection part to the transaxle rear mounting bracket.

Fig 1: Identifying Shift Linkage Assembly
Courtesy of SUZUKI OF AMERICA CORP.
Install the universal joint to the transaxle.
Install the clip and the bolt from universal joint.
Install the rod clamp. Refer to Shift Linkage Adjustment .
Adjust the shift linkage. Refer to Shift Linkage Adjustment .
Connect the negative battery cable.

Fig 2: Identifying Clip And Bolt Of Universal Joint
Courtesy of SUZUKI OF AMERICA CORP.