Front Parallel Link Removal and Installation: Installation
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.
- Install the front parallel link.
- Install the front parallel link onto the rear knuckle with the bolt.
Tighten:
Tighten the front parallel link-to-knuckle bolt to 120 N.m (89 lb-ft).
- Install the front parallel link onto the rear cross-member with the bolt. Do not tighten.
- For vehicles equipped with the antilock braking system, install the ABS housing assembly onto the front parallel link and the ABS sensor line into the knuckle.
- Install the wheel. Refer to WHEEL REMOVAL AND INSTALLATION .
- Perform a rear toe adjustment. Refer to Rear Toe Adjustment .