Front Strut Assembly Disassembly and Assembly: Assembly

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.

Install the lower ring insulator and the spring.
Compress the spring using the spring compressor KM-329-A.
Install the hollow bumper, the upper ring insulator, the front spring locator, the upper spring seat, the upper strut mount, and the mount bearing. Be sure the upper spring seat is clipped to the front spring locator.

Fig 1: Exploded View Of Strut Assembly
Courtesy of SUZUKI OF AMERICA CORP.
Install the piston rod nut.
Tighten:

Tighten the piston rod nut to 75 N.m (55 lb-ft).
Release the spring compressor KM-329-A.

Fig 2: Installing Piston Rod Nut
Courtesy of SUZUKI OF AMERICA CORP.