Control Arm Bushings Disassembly and Assembly: Disassembly
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the control arm. Refer to Control Arm Removal and Installation .
- Remove the split sleeves from the rear control arm bushing.
- Press off the control arm rear damping bushing using a press and the remover/installer KM-158.