Control Arm Bushings Disassembly and Assembly: Assembly
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.
- Press the control arm rear damping bushing into the control arm using a press and the remover/installer KM-158.
- Install the split sleeves into the rear control arm bushing.
- Install the control arm. Refer to Control Arm Removal and Installation .