Ball Joint Disassembly and Assembly: Assembly
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the ball joint to the control arm by inserting 2 ball joint bolts from below the control arm.
Tighten:
Tighten the ball joint-to-control arm nuts to 100 N.m (74 lb-ft).
- Install the control arm. Refer to Control Arm Removal and Installation .