LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 54 (Engine Exhaust System) >> Repair Instructions >> Muffler - Front Removal and Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Muffler - Front Removal and Installation: Installation

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the front muffler to the rubber hanger.
  2. Attach the front muffler and the gasket to the rear muffler using the nuts. Secure the front muffler to the rubber hanger.

    Tighten: 

    Tighten the front muffler-to-rear muffler nuts to 30 N.m (22 lb-ft).

    Fig 1: Identifying Nuts And Rear Muffler Pipe Flange (2 Of 2)
    G04716766Courtesy of SUZUKI OF AMERICA CORP.
  3. Loosely secure the front muffler assembly to the connecting pipe flange.
  4. Secure the front muffler assembly to the connecting pipe flange with the nuts.

    Tighten: 

    Tighten the front muffler-to-exhaust front pipe nuts to 30 N.m (22 lb-ft).

    Fig 2: Disconnecting Front Muffler From Rubber Hanger
    G04716765Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals