LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (Engine Electrical Devices) >> Repair Instruction >> Engine Coolant Temperature Sensor Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Engine Coolant Temperature Sensor Removal and Installation: Removal

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.
  1. Relieve the coolant system pressure.
  2. Disconnect the negative battery cable.
  3. Disconnect the Engine Coolant Temperature (ECT) sensor connector.
  4. Remove the ECT sensor from the Electronic Ignition (EI) system ignition coil adapter.
    Fig 1: ECT Sensor From Electronic Ignition (EI) System Ignition Coil Adapter
    G04716362Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals