Engine Coolant Temperature Sensor Removal and Installation: Installation
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.
- Coat the threads of the ECT sensor with sealer.
- Install the ECT sensor into the EI system ignition coil adapter.
Tighten:
Tighten the engine coolant temperature sensor to 20 N.m (15 lb-ft).
- Connect the ECT sensor connector.
- Fill the coolant system.
- Connect the negative battery cable.