LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (Engine Electrical Devices) >> Engine Electrical Devices >> Manifold Absolute Pressure Sensor Removal and Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Manifold Absolute Pressure Sensor Removal and Installation: Installation

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the MAP sensor connector to the MAP sensor.
  2. Install the MAP sensor into the intake manifold.
  3. Install the MAP sensor retaining bolt.

    Tighten: 

    Tighten the MAP sensor retaining bolt to 4 N.m (35 lb-in).

  4. Connect the fuel rail. Refer to FUEL RAIL AND INJECTORS REMOVAL AND INSTALLATION .
  5. Connect the negative battery cable.
scientia non olet · About LEMON Manuals